Call now to get tree support such as tree clearance, tree cutting, bush digging, shrub removal, stump chop and lots of other within USA:

Call us now

Call us now +1 (855) 280-15-30

Insert 2x springs Note: Note installation positions.

Description. Spare Parts.

Take the axles and slide a seal over it, the thin portion of the seal should be facing the bearing and the small step on the axle should go into the bearing, it will not fit together any other way so again you can not go wrong.

Downloads. To remove and install the rear axle body bush on the vehicle. Suitable for: Astra H onwards. - Meriva B onwards. - Zafira B onwards. Astra Bush Number: (FSK). Lift rear axle with hydraulic jack, KM and KMA until distance measurement I = ± 10 mm between the spring mounting of the rear axle and the spring mounting of the vehicle underbody.

Distance measurement I must be the same on both the right and left side. OPEL VAUXHALL ASTRA H Rear Axle Trailing Bush Removal Install Puller tool Set - EUR 81, ZU VERKAUFEN! Sub-Frame Axle Bush Mounting Remover/Installer Rear Trailing Arm Bush Tool for: Vauxhall/Opel: Opel Vauxhall Astra H MkV Rear Axle Bush Removal Extractor Replacement tool 1 van 1 Meer.

Zie Details op eBay beschikbaar op Zoeken Alle Winkels. Opel Vauxhall Astra H MkV Rear Axle Bush Removal Extractor Replacement tool. EUR 88,36 Nu Kopen 6d. Remove. Remove rear wheels. Remove rear axle - see operation"Rear Axle, Remove and Install". Caution. To remove the damping bushing, simply turn the fork wrench (2) and counterhold with the adjacent hexagon of KMA (5).

Detach fastening bolt from rear axle bracket and remove rear axle bracket. Remove spacer ring (1) from damping bushing.

The idea is to collapse the outer aluminium housing allowing the bush to come free, work around the bush collapsing it in.

OPEL VAUXHALL ASTRA H Mk5 Rear Axle Trailing Bush Removal Install Puller tool - EUR 53, FOR SALE! Sub-Frame Axle Bush Mount Mounting Rear Trailing Arm Bush Installation Tool. Fitting guide for Astra H rear beam bushes Here is the method of replacing the rear bushes that we have found most easy.

The whole job should take no more than 3 hours to complete requiring only a range of torques bits, set of spanners, allen keys, a selection of chisels and a decent hammer.