Call now to get tree support such as tree clearance, tree cutting, bush digging, shrub removal, stump chop and lots of other within USA:

Call us now

Call us now +1 (855) 280-15-30

Mine were tantalizingly close, and I thought I could just tap.

Jan 30, Golf MK4 / mk 4 tdi trailing arm bush replacemtent. an idiots guide to changing the rear bushes. ok first, i loosened the wheel bolts then jacked the car up pretty high, placed an axle stand under the jacking point on the sill as you should never ever trust a trolley jack (even though mines 3tonne and brand new a still dont Estimated Reading Time: 6 mins.

Rear axle bushing replacement Compliments of RabbitsKin @ I did some searching and couldn't find what I was looking for, so here is a how-to on replacing the hydraulic-bonded rear axle bushings in a MKIV. WhyEstimated Reading Time: 7 mins. Jun 20, 1) Lift the rear of the car and put it on jack stands, leaving it low enough that the tires are still on the ground, but enough clearance to get underneath and reduce the weight on parts.

Joined: Oct 29, Likes Received: 0.

2) Unbolt the rear axle beam at the bushing joint and bring that end down. CV Axle installation Guide for a Volkswagen Jetta / Golf T. Volkswagen MK4 axle installation.

Engage parking brake and secure rear wheels with. VW MK4 MKIV Golf Jetta GTI control arm.

It looks like this: Take apart the hacksaw, put the blade through the hole, and cut one slot in the sleeve carefully.

Upgrade to solid rubber R32 / Audi TT bushings in rear and polyurethane graphite bushings in the front for rock solid. Bush Removal Adaptor Set - VW Golf IV. Oct 29, Mk4 Rear Beam Bushes: Removal and Fitting? Discussion in 'Chassis' started by Richard Mk2, Sep 5, I've done the rear bushes on our Toledo, which is Golf MK4 platform.

I removed the old and fitted the new bushes using a proper tool kit off eBay. i would advise using copper grease on the axle and bush when pulling the new on in as it.